點擊圖片查看大圖| 機器參數 | ||||||
| 機器型號 | Machine Type | Unit | TA-300/S/DS/LS | |||
| 射出系統 | INJECTION SYSTEM | 螺桿直徑 | Screw Diameter | mm | 28 | 30 |
| 射出壓力 | Injection Pressure | kgf/cm2 | 1446 | 1260 | ||
| 理論注射容積 | Theoretical Injection Volume | cm3 | 62 | 71 | ||
| 射出重量(PS) | Max.Shot Weight(PS) | g/oz | 58/2.0 | 66.5/2.3 | ||
| 射出速率 | Injection Rate | cm3/sec | 62 | 71 | ||
| 溫度控制段數 | Number Of Temperature Control | zone | 3 | |||
| 鎖模系統 | CLAMPING SYSTEM | 鎖模力 | Clamping Force | kn | 254 | |
| 模柱間距 | Distance Between Tie Bar | mm | 370x200 | |||
| 上模板尺寸 | Top Platen Size | mm | 495x325 | |||
| 下模板尺寸 | Bottom Platen Size | mm | 540x380 | |||
| 滑板尺寸 | Sliding Platen Size | mm | S:350x340 | |||
| DS:350x680 | ||||||
| LS:350x350 | ||||||
| 小模厚 | Min.Mold Height | mm | 120 | |||
| 開模行程 | Opening Stroke | mm | 180 | |||
| 大開模間距 | Max.Opening Distance | mm | 300 | |||
| 射嘴中心高 | Nozzle Center Heignt | mm | — | |||
| 射嘴中心距 | Nozzle Center Distance | mm | — | |||
| 頂出力量 | Ejector Force | kn | 13 | |||
| 頂出行程 | Ejector Stroke | mm | 35 | |||
| 油壓電力 | ELECTRIC HYDRAULIC SYSTEM | 大液壓壓力 | Max.Hydraulic Preesure | kgf/cm2 | 140 | |
| 油箱容量 | Oil Tank Capacity | L | 140 | |||
| 油泵電機電力 | Pump Motor Power | (Hp)kw | (5)3.7 | |||
| 電熱容量 | Barrel Heating Power | kw | 3.3 | |||
| 總用電量 | Total Wattage | kw | 7 | |||
| 其它 | OTHERS | 機器重量 | Machine Weight | kg | 1100 | |
| 機器外形尺寸 | Machine Dimensions | cm | 130x90x235 | |||
立式注塑機
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換