OTP/OTK系列 300℃/320℃反應釜油加熱器/反應釜油控溫機

300℃/320℃ oil type mold temperature controller

型      號 ： OTP/OTK系列

Series: OTP/OTK series
     類      型  ：  壓鑄/注塑/化工行業

Type: compress/injection.chemical industry
>>應用范圍     輥輪加溫、射出成型模具控溫、捏合機加溫、鋅鋁合金壓鑄、鎂合金射出成型、油加熱器
Application range: Temperature control of high-temperature roller/ roll barrel, injection mould, Aluminum magnesium and zinc alloy mold die-casting, oil heater.
>>機型特點   Main feature

●   高使用溫度300℃/320℃ Highest temperature reaching 300℃/320℃

●   微電腦觸摸式，操作簡單  The panel control adopted micro, easy operation

●   OMRON、FUJI、SCHNEIDER、TE控制零件Electric parts use OMRON,FUJI, SCHNEIDER .TE
●   開機自動排氣功能Automatic exhaust function as starting up the machine

●   不銹鋼管路，減少管阻及銹垢Medium circulation pipe with stainless ,reduces pipe block 
●   自動冷卻關機Power off with automatic temp descending

●   故障顯示，維修不用專業人員Complete with safety protection and error indication system for easy operation
 ●   出油、回油溫度顯示Outlet and inlet with temp.digital display meter

●   模具回油功能（選購）mold oil return function (Option)
>>安全保護系統 Safety system
    ●   總電源過電流無熔絲斷路器 Circuit breaker     ●   異常警告指示燈系統 Alarm system
    ●   馬達反轉保護及指示燈 motor rollback protective lamp     ●   異常警告蜂鳴器 Alarm sounding
    ●   缺油保護及指示燈Oil lack protective lamp                     ●   保溫隔熱處理 Insulation heating system
    ●   過熱保護及指示燈 over-heat protective    ●   回油溫度顯示表Oil reture display
    ●   循環泵浦過載保護及指示燈Circuiting pump overload protective lamp

●   電源欠相保護 Power protection
    ●   By-Pass油壓回路 By-pass hydrauic circuit
;

由于導熱油熱穩定性能好、傳熱性能佳、低蒸汽壓、以及無毒無味、對設備無腐蝕等許多優點。 我公司電加熱導熱油爐已逐步被更廣泛的企業生產所選用。系統特點：

1.高品質的熱源 導熱油加熱系統可在常壓液相下，為熱用戶輸出高350℃的熱油；我公司導熱油加熱系統均采用日本OMRON溫控儀表，運用雙PID自整定智能控溫技術，控制精度可達±1℃左右溫度，準確控制使用的溫度范圍內；加熱主電源采用固態模塊無觸點開關電路，適應頻繁開關，并對供電網絡無干擾。并具有防干燒。可根據用戶要求設計添加熱油冷卻系統，以滿足升溫后需要快速降溫的生產工藝要求；

2.節約能源，運行費用低 導熱油加熱系統為液相閉路循環，出油溫度和回油溫度相差20-30度，也就是說只加熱20-30度的溫差就能達到使用溫度。同時該設備不需要水處理設備并且無蒸汽鍋爐的跑、冒、滴、漏等熱損失，熱利用率很高，與蒸汽鍋爐相比，節能50％左右；

3.設備少 由于導熱油加熱系統簡單，無水處理設備及更多的輔助設備、鍋爐承受低壓力等，所以整個系統較少；

4.安全 由于系統只承受泵壓，導熱油加熱系統無爆炸危險，因而其更加安全；

5.環保 有機熱載體加熱系統的環保效果主要體現在煙氣排放量極少，無排污污染及熱污染

Because of good stability heating conduction, good heat transfer performance, low vapor pressure, as well as non-toxic and tasteless, corrosion to equipment, Our electric heating oil furnace are widely used in many field. Main features below,

1. High-quality oil heating system can provide maximum output of350 ℃hot oil; our oil heating systems are using Japan OMRON temperature controller,  with double intelligent self-tuning PID control temperature technology, control precision up to ±1 ℃temperature and accurately control the temperature within the range of use; heating power using solid-state non-contact switch circuit modules, adapt to frequent switching, and the power supply network without interference. And it is anti-dry. According to user requirements and design, it can add hot oil cooling system to meet the needs of rapid cooling after heating during production process;

2. Energy saving, low operating costs. Oil heating system equipped closed-loop control, temperature of oil inlet and oil outlet is between 20-30 degrees , which means that only the heating temperature difference can reach 20-30 degrees operating temperature. Meanwhile, the device does not require water treatment and no steam, boilers run, run, drip, heat leakage, high efficiency, compared with the steam boiler, saving about 50%;

3. Small investment of the auxiliary equipment as the heating system is simple.

4. More Safety as the system is exposed only to the pump pressure, do not have the risk of oil heating explosion.

5. Environmental protection, no pollution for the air and heating.